BHDTY - WHITE EXTERIOR LATEX

  • MSDS: BHDTY
  • Manufacturer: CROWN PAINT COMPANY
  • Product Name: WHITE EXTERIOR LATEX
  • National Stock Number: 8010-00-754-2608
Product Identification

Product ID:WHITE EXTERIOR LATEX
MSDS Date:01/01/1987
FSC:8010
NIIN:00-754-2608
MSDS Number: BHDTY

Responsible Party
CROWN PAINT COMPANY
400 N.E. 4TH STREET
OKLAHOMA CITY, OK 73117
US

Emergency Phone: 405-232-8580

Cage: OG5U8

Contractor
CROWN PAINT COMPANY
350 OKLAHOMA CITY, OK 73106 US

Telephone: (105) 232-8580

Cage: OG5U8

Ingredients

MAGNESIUM SILICATE

CAS: 1343-90-4

RTECS: OM4360000

OSHA PEL 20 MPPCF


BUTYL CELLOSOLVE

RTECS: EP3600000

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS OR SPRAY MISTS CAN IRRITATE
MUCOUS MEMBRANES OF THE EYES, NOSE, THROAT, AND RESPIRATORY TRACT.
MAY CAUSE HEADACHES. NAUSEA MAY OCCUR IN POORLY VENTED AREAS.
PROLONGED/REPEATED SKIN CONTACT M AY CAUSE SKIN IRRITATION. DIRECT
EYECONTACT MAY RESULT IN EYE IRRITATION.
Effects of Overexposure:EYES WATER AND DIFFICULTY BREATHING.
Medical Cond Aggravated by Exposure:DERMATITIS AND LIVER ABNORMALITIES

First Aid

First Aid:MOVE SUBJECT TO FRESH AIR. FLUSH SKIN AND EYES WITH WATER.
INGESTION: INDUCE VOMITING AND CONSULT PHYSICIAN.

Fire Fighting

Lower Limits:12.7
Extinguishing Media:REGULAR FOAM, CARBON DIOXIDE, DRY CHEMICAL
Unusual Fire/Explosion Hazard:ACRYLIC EMULSION WILL NOT BURN, BUT MAY
SPLATTER AS TEMPERATURE EXCEEDS BOILING POINT.

Accidental Release

Spill Release Procedures:DIKE AND ABSORB WITH INERT MATERIAL AND PLACE
INTOCONTAINERS.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING.

Exposure Controls

Respiratory Protection:NONE REQUIRED IF VENTILATION IS ADEQUATE.
Ventilation:MECHANICAL (GENERAL) EXHAUST ADEQUATE TO KEEP BELOW TLV
Protective Gloves:RUBBER OR BUNA N
Eye Protection:CHEMICAL SPLASH GOGGLES
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING, AND USING
THE WASHROOM.
Supplemental Safety and Health
NK

Chemical Properties

Vapor Pres:.6 MM HG
Vapor Density:4.0(AIR=1)
Spec Gravity:1.36 (H2O =1)
Evaporation Rate & Reference:.10 (BUTYL ACETATE=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE LIQUID, SLIGHT AMMONIA ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NK

Disposal

Waste Disposal Methods:LANDFILL ACCORDING TO FEDERAL AND STATE LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.